COMEUP WALRUS 18.0 WINCH 12V/24V

DESCRIPTION:

• 12/24V DC severe duty winch rated at 22.000 lb pulling meets or exceeds your expectations
• Waterproof and dustproof construction;
• Potted contactor and motor provide complete protection from water penetration and allow dependable operation in up to 1.8 meter of water.
• Rubber seals at motor and gear housing joints for independent water protection
• Double lip and spring seal at drum support racks
• Industrial duty remote control with twist-on connector to provide total protection from water.
• Water-proof remote control with thermometric LED indicator alerts when receiving a warning signal from the motor over-heated.
• Tough aluminum die cast housings withstand strength of 2 times winch line pull at least.
• U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slippage.
• Corrosion resistance 720hr
• Meets international standards of CE Machinery Directive 2006/42/CE, CE Electromagnetic Compatibility Directive 2014/30/EU, and SAE J706 Surface Vehicle standard 2003-08 rev

SPECIFICATIONS:

• Part number:  PN 281800 (12V) / PN 281810 (24V)
• Rated line pull: 8,165 kg / 18,000 lb single line
• Line speed ( 1st layer): 5.2 mpm / 17.1 fpm 45 A at 12V, 7.0 mpm / 23 fpm 35 A at 24V no load
•                                      0.8 mpm / 2.6 fpm 320 A at 12V, 1.7 mpm / 5.6 fpm 210 A at 24V full load
• Motor: 5,220 w / 7.0 hp 12V series wound
•            4,474 w / 6.0 hp 24V series wound
• Gear train: 3-stage planetary 343:1
• Clutch (freespooling): Rotating ring gear
• Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
• Winch construction: Aluminum die cast housings with steel drum
• Drum size: 89 mm x 204L mm (3.5" x 8"L)
• Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
• Rope type: 6 × 29 - IWRC (Breaking strength 100.7 kN)
• Rope size: 11.1 mm x 27 m (7/16” x 89’)
• Mounting bolt pattern: 254 mm x 114.3 mm (10” x 4.5”)
•                                      254 mm x 165 mm (10" x 6.5")
• Mounting: Foot forward mounting only 

* Remark: Only foot forward mounting can meet SAE J706

PERFORMANCE:

Line Speed and Amp Draw (1st layer of the rope on the drum):

Line Pull and Rope Capacity:

Warning:

• The winch is not intended to be used in any manner for the movement or lifting of personnel. 
• The rated line pull shown is based on the first layer of rope on the drum.
• The rope winding on the drum shall remain 5 wraps from the drum.

Warranty:

• Limited lifetime warranty for mechanical components and one(1) year warranty for electrical components from date of purchase. Wire/Synthetic ropes are not included under warranty.

Standard Accessories:

• Roller fairlead
• Remote control w/5 m (17’) cord
• Detachable control box 
• Wire rope w/clevis hook 
• Cable tensioner
• 1.8 m (6’) 2 gauge battery lead   
• Handsaver strap 

Package size:

• Winch weight (including rope) : 72 kg / 158.7 lb
• Gross weight : 78 kg / 172 lb
• Box dimension, (L x D x H) : 690 x 270 x 405 mm (27.2" x 10.6" x 15.9")