ARB LINX TPMS COMMS BOXBLUETOOTH MODULE

LINX ACCESSORIES

To complement LINX is a range of components and hardware to help you seamlessly integrate optional accessories and your LINX display in vehicle.

OVERVIEW

Monitor and keep a close eye on your vehicle and trailer's tyre pressure with the Tyre Pressure Monitoring System (TPMS) Bluetooth module – integrating your ARB TPMS sensors with the LINX device!

Installed via the vehicle's 12V power supply, a Bluetooth comms box (sold separately) reads data from the ARB TPMS' sensors and conveniently shows independent readings from your vehicle and up to 3 trailers straight onto your LINX display.

FUNCTIONS

• Via a Bluetooth comms box (sold separately)and ARB TPMS tyre sensors, wirelessly monitor your vehicle and trailer's tyre pressure and temperature on your LINX display.
• Configure and set up to 4 specific modes of your choice, including custom naming and the desired tyre pressure for all tyres within the specific mode.
• Auto Trailer Detection allows for convenient switching between trailers - LINX will automatically detect and display the correct pre-programmed trailer if you swap for example, from your box trailer to your boat trailer.
• Set trailer type and icon: single or tandem.
• Set a desired pressure variation alert value.
• Set a desired temperature alert value.
• Set a desired tyre pressure for a spare tyre.
• Quickly and easily learn, change or delete the sensor for each wheel if you're changing tyres or swapping a wheel.

LINX TPMS MODULE DESCRIPTION

The LINX TPMS MODULE provides the capability to monitor ARB Air Systems TPMS sensors. It requires the installation of a LINX TPMS Module (ARB #7450116). It displays the current tyre pressure and temperature. It sounds and displays alerts related to pressure, temperature, sensor low battery and non-communicating sensor.

Once trailers have been configured LINX will automatically switch between them, or activate/deactivate them when they are connected/disconnected to your vehicle.

LINX TPMS MODULE INSTALLATION

The LINX TPMS Module should be positioned in a fairly central location in the vehicle, equidistant from all wheels. This will ensure the best performance from all TPMS tyre sensors. Under the armrest center console is a typically good location. It is a central location and in most vehicles it also has a 12VDC outlet which can be used to power the module.

Secure the LINX TPMS Module in place using at least one of the screw mounting tabs or using cable ties.

Test for a 12VDC circuit that turns on when the vehicle key is the ACC or ON position. The circuit must also be off when the vehicle key is in the off position, hence not a

permanent battery connection or else the module will continue to draw power from the vehicle battery when the vehicle is turned off.

Connect the RED wire to this circuit using a suitable method such as an insulated wire tap or solder and tape. A 12VDC power outlet or cigarette lighter socket provides this functionality and is the ideal place to piggy back power from.

Connect the BLACK wire to a vehicle ground.

To connect the LINX TPMS Module to the LINX Display refer to the instructions in the latest LINX Operation Guide.